Current command:
hf mfdes setconfig --help
Set card configuration. WARNING! Danger zone! Needs to provide card's master key and works if not blocked by config. usage: hf mfdes setconfig [-hav] [-n <dec>] [-t <DES|2TDEA|3TDEA|AES>] [-k <hex>] [--kdf <none|AN10922|gallagher>] options: -h, --help This help -a, --apdu Show APDU requests and responses -v, --verbose Verbose output -n, --keyno <dec> Key number -t, --algo <DES|2TDEA|3TDEA|AES> Crypt algo -k, --key <hex> Key for authenticate (HEX 8(DES), 16(2TDEA or AES) or 24(3TDEA) bytes) --kdf <none|AN10922|gallagher> Key Derivation Function (KDF) -i, --kdfi <hex> KDF input (1-31 hex bytes) -m, --cmode <plain|mac|encrypt> Communicaton mode -c, --ccset <native|niso|iso> Communicaton command set --schann <d40|ev1|ev2|lrp> Secure channel --aid <hex> Application ID of application for some parameters (3 hex bytes, big endian) --isoid <hex> Application ISO ID (ISO DF ID) (2 hex bytes, big endian). -p, --param <hex> Parameter id (1 hex byte) -d, --data <hex> Data for parameter (1..30 hex bytes) examples/notes: More about options MF2DLHX0.pdf. Options list: 00h PICC configuration. 02h ATS update. 03h SAK update 04h Secure Messaging Configuration. 05h Capability data. (here change for LRP in the Desfire Light [enable 00000000010000000000]) 06h DF Name renaming (one-time) 08h File renaming (one-time) 09h Value file configuration (one-time) 0Ah Failed authentication counter setting [disable 00ffffffff] 0Bh HW configuration