Current command:
hw
help This help ------------- ----------------------- Operation ----------------------- detectreader Detect external reader field status Show runtime status information about the connected Proxmark3 tearoff Program a tearoff hook for the next command supporting tearoff timeout Set the communication timeout on the client side version Show version information about the client and Proxmark3 ------------- ----------------------- Hardware ----------------------- break Send break loop usb command bootloader Reboot into bootloader mode connect Connect to the device via serial port dbg Set device side debug level fpgaoff Turn off FPGA on device ping Test if the Proxmark3 is responsive readmem Read from MCU flash reset Reset the device setlfdivisor Drive LF antenna at 12MHz / (divisor + 1) sethfthresh Set thresholds in HF/14a mode setmux Set the ADC mux to a specific value standalone Start installed standalone mode on device tia Trigger a Timing Interval Acquisition to re-adjust the RealTimeCounter divider tune Measure tuning of device antenna