Current command:
lf config --help
Get/Set config for LF sampling, bit/sample, decimation, frequency These changes are temporary, will be reset after a power cycle. - use `lf read` performs a read (active field) - use `lf sniff` performs a sniff (no active field) usage: lf config [-hr] [--125] [--134] [-a <0|1>] [-b <1-8>] [--dec <1-8>] [--divisor <19-255>] [-f <47-600>] options: -h, --help This help --125 125 kHz frequency --134 134 kHz frequency -a, --avg <0|1> averaging - if set, will average the stored sample value when decimating (default 1) -b, --bps <1-8> sets resolution of bits per sample (default 8) --dec <1-8> sets decimation. A value of N saves only 1 in N samples (default 1) --divisor <19-255> Manually set freq divisor. 88 -> 134 kHz, 95 -> 125 kHz -f, --freq <47-600> manually set frequency in kHz -r, --reset reset values to defaults -s, --skip <dec> sets a number of samples to skip before capture (default 0) -t, --trig <0-128> sets trigger threshold. 0 means no threshold examples/notes: lf config -> shows current config lf config -b 8 --125 -> samples at 125 kHz, 8 bps lf config -b 4 --134 --dec 3 -> samples at 134 kHz, averages three samples into one, stored with a resolution of 4 bits per sample lf config --trig 20 -s 10000 -> trigger sampling when above 20, skip 10 000 first samples after triggered lf config --reset -> reset back to default values